emc technology cage code # 24602 dwg # 1010925000 8851 sw old kansas ave. change notice en 08-e0160 rev lvl a stuart, fl 34997 sheet 1 of 2 title: specification control drawing part identifier: cexxxxxxxw1 x metallization style (w1=single wrap) xx highest frequency xx lowest frequency xx slope (n = linear negative p = linear positive) xx db nominal value description: fixed chip equalizer assembly dwg: 1901964 1.0 specifications: 1.1 electrical: 1.1.1 impedance: 50 ohms nominal. 1.1.2 operating frequency range: 2 ghz - 18 ghz. 1.1.3 nominal attenuation value: identifier nominal attenuation 01 1db 02 2db 03 3db 04 4db 1.1.4 attenuation linearity at 25c: 0.5. see figure 1 below. 1.1.5 vswr: 1.7:1 max. @ nominal attenuation frequency. (highest freq uency for negative slope or lowest frequency for positive slope) 1.1.6 input power: 0.25 watts cw. 1.1.6.1 full rated power to 125 c, derated linearly to 0 watts at 150 c. 1.1.7 insertion loss: 1.0 db (typical) @ low frequency for positive slope or high frequency for negative slope figure 1. 1.2 mechanical: 1.2.1 outline dwg: see sheet 3. 1.2.2 workmanship: per mil-prf-55342. 1.3 environmental: 1.3.1 operating temperature range: -55c to +150c. 2.0 unit marking: db value (xx) legibility and permanency per mil-std-130 . 3.0 quality assurance: 3.1 sample inspect per ansi/asqc z1.4 general inspection, level ii, aql = 1.0. 3.1.1 visual and mechanical examination for conformance to outline drawing requirements. 3.2 inspection in accordance with qa0006 and form0357 for commercial grade product. 3.3 test data requirements: 3.4.1 no test data required for customer. 3.4.2 data retention - 24 months. 4.0 packaging: standard pack per mc0023.
|
